Radial Engineering Jpc Stereo Pc Di Box
The Radial Engineering JPC stereo PC direct box is specifically designed to connect computer sound cards and other consumer electronic products to professional sound systems. The JPC stereo DI box combines the advantages of transformer-isolated inputs witThe Radial JPC is a stereo direct box that has been specifically designed for use with computer sound cards and other consumer electronic products to allow these to be connected to a professional sound system. It is unique in that it combines the advantages of transformer-isolated inputs with an active drive circuit, giving you the ‘best of both worlds’ in a compact and extremely flexible package. Transformer coupled inputs have the unique advantage of isolating the ‘source’ from the ‘destination’. This proven approach eliminates 60-cycle hum and buzz caused by so-called ground loops when two pieces of electrically powered devices are connected together. Because the active circuit does all of the impedance conversion and balancing, a dedicated 1:1 transformer can be used. This results in a hybrid design that is at once great sounding, compact and more affordable. As with all great designs, simplicity is a fundamental trait and the Radial JPC certainly fits the bill. A choice of stereo “, 1/8” and RCA input AND thru-put connectors make interfacing a snap with all types of equipment. A single switch inserts a 10dB pad, two power LEDs confirm 48V phantom is turned on, and a pair of XLR output connectors round out the feature set. Of course like all Radial products, the JPC is built to handle any environment. The book-cover wrap-around sleeve design protects switches and connectors from damage while the 14 gauge steel I-beam construction eliminates stress that could torque the PC board and cause solder joint failure. A full-bottom no-slip pad provides electrical insulation and mechanical isolation with plenty of ‘stay-put’ for use on hectic stages. And with its baked enamel finish, the Radial JPC will continue looking great for years!
Radial Engineering Radial Engineering Jpc Stereo Pc Di Box R800 1026 Pro Audio, Signal Processors, Direct Boxes

More info, price and order:
“Radial Engineering Jpc Stereo Pc Di Box“

Radial Engineering Jdx-48 Reactor Guitar Amp Direct Box
The Radial Engineering JDX-48 is a direct box for the contemorary professional. The prevailing complaint about direct boxes for electric guitar is that they do not capture the guitar’s details properly. By designing the JDX-48 to be comfortable deriving iAuthentic replication of your sound without the inconsistencies of mikingEffective 412 cabinet emulationConsistent output show after showI-beam super-rugged construction
Radial Engineering Radial Engineering Jdx-48 Reactor Guitar Amp Direct Box R800 1402 Pro Audio, Signal Processors, Direct Boxes

More info, price and order:
“Radial Engineering Jdx-48 Reactor Guitar Amp Direct Box“

Radial Engineering Pz-Di Acoustic/Orchestral Instrument Active Direct Box
The Radial PZ-DI is a unique direct box that is specifically designed for acoustic and orchestral instruments. Unlike most direct boxes that are limited to a ‘one size fits all’ design, the PZ-DI lets you properly match the input impedance to the source tOptimized for orchestral instruments on a live stageAdjustable load for piezo and magnetic pickupsVariable low-cut filter to control bass resonance48V phantom powered, does not require batteries
Radial Engineering Radial Engineering Pz-Di Acoustic/Orchestral Instrument Active Direct Box R800 3005 00 Pro Audio, Signal Processors, Direct Boxes

More info, price and order:
“Radial Engineering Pz-Di Acoustic/Orchestral Instrument Active Direct Box“

Radial Engineering Proms2 Passive Microphone Splitter
The Radial ProMS2 is a high performance mic splitter that accepts a balanced microphone signal and sends it to three outputs simultaneously. As a passive device, there is no need for power you merely plug in and the ProMS2 automatically springs to lifeHigh performance Eclipse transformer for optimal signal transferEquipped with direct, isolated and auxiliary outputs for 3-way splitMay be rack-mounted in the J-Rak for multi-channel useRugged 14-gauge steel construction for added durability and shieldingf
Radial Engineering Radial Engineering Proms2 Passive Microphone Splitter R800-1122 Pro Audio, Signal Processors, Direct Boxes

More info, price and order:
“Radial Engineering Proms2 Passive Microphone Splitter“

Radial Engineering Proav2 Stereo Direct Box
The Radial ProAV2 is a passive direct box specifically developed with the audio-video integrator in mind. It has full two-channel stereo functionality.To eliminate the need for various adaptor, a “Swiss Army” array of connections are provided,Great-sounding, flexible passive DIHigh performance custom-wound transformerPro “Swiss Army knife” direct box for multi-mediaEasy to use passive ultra-quiet designEliminates ground loops causing hum and buzzHandle huge transients without distortionCompletely passive, no power neededXLR, 1/4″, RCA and 3.5mm inputsBuilt-in stereo to mono merge function-15dB PAD for wide range of input levelsConverts hi-Z consumer to low-Z mic-levelConnect a stereo source to a mono channelUnbalanced audio from CDs, laptops, VCRsUltra-tough 14 gauge steel enclosure3-year transferable warranty
Radial Engineering Radial Engineering Proav2 Stereo Direct Box R800 1115 00 Pro Audio, Signal Processors, Direct Boxes

More info, price and order:
“Radial Engineering Proav2 Stereo Direct Box“