Category Archives: Record Players

Numark pt-01usb portable usb turntable… #6183w

Numark Pt-01Usb Portable Usb TurntableNumark Pt-01Usb Portable Usb Turntable
The revolutionary Numark PT-01USB is a portable USB turntable that converts your vinyl to WAV or MP3 wherever, and whenever you want. With the PT-01USB, you get a rugged, portable turntable that can run on either wall or battery power. The Numark PT0-01USPlug-and-play USB connectionProtective dust cover and integrated carrying handleFits inside a standard 12″ record caseWall-powered with included AC adapter or battery-powered (six “D” cells, not included)Internal monitoring speakerBelt-drive motor with 33, 45, and 78 RPM settings10% pitch controlConverts all standard-sized records up to 12″RCA line and headphone outputsStereo 1/8″ line input45 RPM adapter includedCartridge includedUSB cable included
Numark Numark Pt-01Usb Portable Usb Turntable PT01USBXUS Pro Audio, Consumer Audio, Record Players

More info, price and order:
Numark Pt-01Usb Portable Usb Turntable

Cherry… #2381o

CherryCherry
Turntable section Drive System: Belt DriveMotor: DC MotorSpeed: 33 1/3 RPM, 45 RPMRotation Speed Variation: +/2%Wow and Flutter: 0.20%Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF)60dB or higher (unweighted, 20kHz LPF): Platter: Aluminum Die-castDiameter of Platter: 12″, 30cmTonearm sectionType: Static Balance, StraightEffective Arm Length: 8.8″, 223mmStylus Pressure Range: 0 to 5gSupported Cartridge Weight: 3.5 to 6.5gAnti-skating Adjustment: SupportedCartridge section Type: MM type (audio-technica AT95E factory installed)Stylus Shape: EllipticalStylus Construction: Bonded Round ShankMount: Half inchFrequency Response: 20Hz to 20kHzChannel Separation: 20dB at 1kHzChannel Balance: 2.0dBTracking Force: 1.5 to 2.5gVertical Tracking Angle: 20 degreesSupported Load Impedance: 47k ohmsOutput Voltage: 4.5mV +/3dBStylus Pressure: 2.0g +/0.5gCartridge Weight: 5.7g +/0.5gHead-shell Weight: 10g (including Screws, Nuts and Wires)Replacement Stylus: audio-technica ATN95EPhono Equalizer Amplifier Type of Amplifier: MM type (On/Thru switchable)Analog OutputConnector: RCA Pin jack (Gold-plated)Output Voltage: Phono/Line switchablePhono Output: 4.5mV +/3dBLine Output: 120mV (13dBV)USB Output section Connector: USB B typeOutput Signal: PCM 48kHz/16-bitSupported OS: Windows 7, Windows 8, Windows 8.1, Windows 10OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9): Power: AC 100 to 240V, 50/60HzPower Consumption: 1.5W (less than 0.5W at Standby)Overall Dimensions (W x H x D): 16.5″ x 4.6″ x 14.0″, 420 x 117 x 356 mmWeight: Approx. 10.8 lbs.  4.9 kgAccessories: Rubber Sheet, EP Adapter, Counter Weight,  Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner’s Manual (including Warranty Card)
TEAC Cherry TN-300-CH Pro Audio, Consumer Audio, Record Players

More info, price and order:
Cherry

Black… #7321p

BlackBlack
Turntable section Drive System: Belt DriveMotor: DC MotorSpeed: 33 1/3 RPM, 45 RPMRotation Speed Variation: +/2%Wow and Flutter: 0.20%Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF)60dB or higher (unweighted, 20kHz LPF): Platter: Aluminum Die-castDiameter of Platter: 12″, 30cmTonearm sectionType: Static Balance, StraightEffective Arm Length: 8.8″, 223mmStylus Pressure Range: 0 to 5gSupported Cartridge Weight: 3.5 to 6.5gAnti-skating Adjustment: SupportedCartridge section Type: MM type (audio-technica AT95E factory installed)Stylus Shape: EllipticalStylus Construction: Bonded Round ShankMount: Half inchFrequency Response: 20Hz to 20kHzChannel Separation: 20dB at 1kHzChannel Balance: 2.0dBTracking Force: 1.5 to 2.5gVertical Tracking Angle: 20 degreesSupported Load Impedance: 47k ohmsOutput Voltage: 4.5mV +/3dBStylus Pressure: 2.0g +/0.5gCartridge Weight: 5.7g +/0.5gHead-shell Weight: 10g (including Screws, Nuts and Wires)Replacement Stylus: audio-technica ATN95EPhono Equalizer Amplifier Type of Amplifier: MM type (On/Thru switchable)Analog OutputConnector: RCA Pin jack (Gold-plated)Output Voltage: Phono/Line switchablePhono Output: 4.5mV +/3dBLine Output: 120mV (13dBV)USB Output section Connector: USB B typeOutput Signal: PCM 48kHz/16-bitSupported OS: Windows 7, Windows 8, Windows 8.1, Windows 10OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9): Power: AC 100 to 240V, 50/60HzPower Consumption: 1.5W (less than 0.5W at Standby)Overall Dimensions (W x H x D): 16.5″ x 4.6″ x 14.0″, 420 x 117 x 356 mmWeight: Approx. 10.8 lbs.  4.9 kgAccessories: Rubber Sheet, EP Adapter, Counter Weight,  Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner’s Manual (including Warranty Card)
TEAC Black TN-300-B Pro Audio, Consumer Audio, Record Players

More info, price and order:
Black

Natural… #6499l

NaturalNatural
Turntable section Drive System: Belt DriveMotor: DC MotorSpeed: 33 1/3 RPM, 45 RPMRotation Speed Variation: +/2%Wow and Flutter: 0.20%Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF)60dB or higher (unweighted, 20kHz LPF): Platter: Aluminum Die-castDiameter of Platter: 12″, 30cmTonearm sectionType: Static Balance, StraightEffective Arm Length: 8.8″, 223mmStylus Pressure Range: 0 to 5gSupported Cartridge Weight: 3.5 to 6.5gAnti-skating Adjustment: SupportedCartridge section Type: MM type (audio-technica AT95E factory installed)Stylus Shape: EllipticalStylus Construction: Bonded Round ShankMount: Half inchFrequency Response: 20Hz to 20kHzChannel Separation: 20dB at 1kHzChannel Balance: 2.0dBTracking Force: 1.5 to 2.5gVertical Tracking Angle: 20 degreesSupported Load Impedance: 47k ohmsOutput Voltage: 4.5mV +/3dBStylus Pressure: 2.0g +/0.5gCartridge Weight: 5.7g +/0.5gHead-shell Weight: 10g (including Screws, Nuts and Wires)Replacement Stylus: audio-technica ATN95EPhono Equalizer Amplifier Type of Amplifier: MM type (On/Thru switchable)Analog OutputConnector: RCA Pin jack (Gold-plated)Output Voltage: Phono/Line switchablePhono Output: 4.5mV +/3dBLine Output: 120mV (13dBV)USB Output section Connector: USB B typeOutput Signal: PCM 48kHz/16-bitSupported OS: Windows 7, Windows 8, Windows 8.1, Windows 10OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9): Power: AC 100 to 240V, 50/60HzPower Consumption: 1.5W (less than 0.5W at Standby)Overall Dimensions (W x H x D): 16.5″ x 4.6″ x 14.0″, 420 x 117 x 356 mmWeight: Approx. 10.8 lbs.  4.9 kgAccessories: Rubber Sheet, EP Adapter, Counter Weight,  Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner’s Manual (including Warranty Card)
TEAC Natural TN-300-NA Pro Audio, Consumer Audio, Record Players

More info, price and order:
Natural

Red… #2241x

RedRed
Turntable section Drive System: Belt DriveMotor: DC MotorSpeed: 33 1/3 RPM, 45 RPMRotation Speed Variation: +/2%Wow and Flutter: 0.20%Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF)60dB or higher (unweighted, 20kHz LPF): Platter: Aluminum Die-castDiameter of Platter: 12″, 30cmTonearm sectionType: Static Balance, StraightEffective Arm Length: 8.8″, 223mmStylus Pressure Range: 0 to 5gSupported Cartridge Weight: 3.5 to 6.5gAnti-skating Adjustment: SupportedCartridge section Type: MM type (audio-technica AT95E factory installed)Stylus Shape: EllipticalStylus Construction: Bonded Round ShankMount: Half inchFrequency Response: 20Hz to 20kHzChannel Separation: 20dB at 1kHzChannel Balance: 2.0dBTracking Force: 1.5 to 2.5gVertical Tracking Angle: 20 degreesSupported Load Impedance: 47k ohmsOutput Voltage: 4.5mV +/3dBStylus Pressure: 2.0g +/0.5gCartridge Weight: 5.7g +/0.5gHead-shell Weight: 10g (including Screws, Nuts and Wires)Replacement Stylus: audio-technica ATN95EPhono Equalizer Amplifier Type of Amplifier: MM type (On/Thru switchable)Analog OutputConnector: RCA Pin jack (Gold-plated)Output Voltage: Phono/Line switchablePhono Output: 4.5mV +/3dBLine Output: 120mV (13dBV)USB Output section Connector: USB B typeOutput Signal: PCM 48kHz/16-bitSupported OS: Windows 7, Windows 8, Windows 8.1, Windows 10OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9): Power: AC 100 to 240V, 50/60HzPower Consumption: 1.5W (less than 0.5W at Standby)Overall Dimensions (W x H x D): 16.5″ x 4.6″ x 14.0″, 420 x 117 x 356 mmWeight: Approx. 10.8 lbs.  4.9 kgAccessories: Rubber Sheet, EP Adapter, Counter Weight,  Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner’s Manual (including Warranty Card)
TEAC Red TN-300-R Pro Audio, Consumer Audio, Record Players

More info, price and order:
Red

White… #7283u

WhiteWhite
Turntable section Drive System: Belt DriveMotor: DC MotorSpeed: 33 1/3 RPM, 45 RPMRotation Speed Variation: +/2%Wow and Flutter: 0.20%Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF)60dB or higher (unweighted, 20kHz LPF): Platter: Aluminum Die-castDiameter of Platter: 12″, 30cmTonearm sectionType: Static Balance, StraightEffective Arm Length: 8.8″, 223mmStylus Pressure Range: 0 to 5gSupported Cartridge Weight: 3.5 to 6.5gAnti-skating Adjustment: SupportedCartridge section Type: MM type (audio-technica AT95E factory installed)Stylus Shape: EllipticalStylus Construction: Bonded Round ShankMount: Half inchFrequency Response: 20Hz to 20kHzChannel Separation: 20dB at 1kHzChannel Balance: 2.0dBTracking Force: 1.5 to 2.5gVertical Tracking Angle: 20 degreesSupported Load Impedance: 47k ohmsOutput Voltage: 4.5mV +/3dBStylus Pressure: 2.0g +/0.5gCartridge Weight: 5.7g +/0.5gHead-shell Weight: 10g (including Screws, Nuts and Wires)Replacement Stylus: audio-technica ATN95EPhono Equalizer Amplifier Type of Amplifier: MM type (On/Thru switchable)Analog OutputConnector: RCA Pin jack (Gold-plated)Output Voltage: Phono/Line switchablePhono Output: 4.5mV +/3dBLine Output: 120mV (13dBV)USB Output section Connector: USB B typeOutput Signal: PCM 48kHz/16-bitSupported OS: Windows 7, Windows 8, Windows 8.1, Windows 10OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9): Power: AC 100 to 240V, 50/60HzPower Consumption: 1.5W (less than 0.5W at Standby)Overall Dimensions (W x H x D): 16.5″ x 4.6″ x 14.0″, 420 x 117 x 356 mmWeight: Approx. 10.8 lbs.  4.9 kgAccessories: Rubber Sheet, EP Adapter, Counter Weight,  Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner’s Manual (including Warranty Card)
TEAC White TN-300-W Pro Audio, Consumer Audio, Record Players

More info, price and order:
White

Black… #7192d

BlackBlack
Belt-drive turntable Built-in MM phono equalizer with USB outputPhono, line, and USB outputsHigh-performance MM cartridge includedEasy transfer music from vinyl to Mac or PC over USBAluminum die-cast platterAnti-skating design2-speed (33-45RPM)Dense composite wood construction for better vibration and resonance controlStylish flat black chassis
TEAC Black TN-200-B Pro Audio, Consumer Audio, Record Players

More info, price and order:
Black